En
Ру
Sitemap
Print Version
Email Sameba Oy
Sahaajankatu 24
00710 Helsinki
Finland
e-mail: info@sameba.fi
tel: +358 (0)9 790512
fax: +358 (0)9 790512
Company > Washout solvent > Super-flex > Procedure

Procedure

Measure the temperature of the solvent to be adjusted. Ensure this is 20°c.

Remove a small sample of solvent a place a couple of drops onto the glass refractometer prism.

Look through the eyepiece and read the brix value of the solvent. This is shown as a blue/white line across the scale of the refractometer.

Check this reading against the correction chart to calculate the percentage of corrective fluid required.

Add corrective fluid to reclaimed solvent and ensure thorough mixing (at least 10 minutes).

Check brix value of the adjusted solvent to make sure it is now correct.

The correct brix value is between 74.0 - 75.5

Photopolymers Flexo Letterpress Resins Miraclon Rigilon Mounting tapes Cutters Mounting Platemaking Solvent Reclaim Waterflow Waterpress Visio FlexoClean Seal Solvit VacuumFoil